Kawai ATX2-p Manual de usuario descargar pdf (Pagina 21)

General Operation

The MIDI Channel function is used to determine on which MIDI channel the AnyTimeX2 piano will exchange

MIDI information with external MIDI devices and instruments.

The selected channel will function as both the Transmit and Receive channel.



Activating Setting Mode

While holding the Soft pedal, press and

hold the top-most ‘C’ key (C8 key)

Release the Soft pedal,

then release the ‘C’ key

Depress the Soft pedal

The above combination of holding the Soft pedal while pressing the top-most ‘C’ key will activate Setting Mode.



Adjusting MIDI Channel

Press white C3 to D5 keys to adjust the MIDI channel.

Please refer to the table below for a list of MIDI channels and the respective key assignments.

MIDI channel (OMNI OFF)

OMNI ON 1ch

Key

C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4 B4 C5 D5

MIDI Channel

12345678910111213141516

* The MIDI channel can be adjusted within the range of 1-16.

* Press black C#3 key to allow MIDI information to be received from all channels.

This is often referred to as ‘OMNI ON’. If, a speci c MIDI channel is selected, the AnyTimeX2 piano will be set to ‘OMNI OFF’ and data will only be

received on that speci ed channel.



Deactivating Setting Mode

After adjusting the desired MIDI channel settings, depress the Damper pedal to deactivate Setting Mode.

* The MIDI channel setting will be set to ‘OMNI ON 1ch’ automatically when the power is turned on.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Kawai ATX2-p Manual de usuario Pagina 21