Kawai CN4 Manual de usuario descargar pdf (Pagina 33)

29DISK OPERATIONS

Disk Operations

MUTING A PART

You can mute each part separately. Press one of the VALUE buttons.

The LCD display will show the part mute screen.

Move the cursor by using the MENU buttons and use the VALUE

buttons to switch between play and mute.

: The part is played.

X : The part is muted.

— : The part is empty.

◆ NOTE The LCD display will automatically return to the previous screen after

two seconds if no buttons are pressed.

RECORDING A SONG

You can also record a song with up to 16 parts on a floppy disk. Insert a

floppy disk in the drive and press the DISK button. Press the

VALUE UP button to go to the Disk Recorder mode. If the disk is

empty, then an empty song will automatically be selected and the LCD

display will show “EmptySong”.

“EmptySong” is selected.

◆ NOTE If the disk already contains any song files, after the first file is selected

pressing the MENU DOWN button will select “EmptySong”.

Press the REC button. The LCD display will show the part selection

screen.

The LCD display shows which part will be recorded.

Use the VALUE buttons to select a part to record.

◆ NOTE Part 10 is reserved as the Drum track. When you select Part 10, you can

record Drum sounds only. Drum sounds can only be recorded on Part 10,

you can not choose Drum Sounds to be recorded on any other part.

◆ NOTE When the Rec Part is set to MIDI, any MIDI data coming in via MIDI IN

jack is recorded in Parts 1 through 16 according to MIDI channel.

123456789

X--- X ------

Empty_Song

Bar= 1- 1 =120

Rec Part= 1

Bar= 1- 1 =100

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 73 74

Sin comentarios

Kawai CN4 Manual de usuario Pagina 33